grandMA3 vs MQ500M
grandMA3 is the rider standard — take it when a touring LD, a broadcast, or a rider names it, or when the rig is large and complex enough that the network of NPUs matters. The ChamSys MQ500M Stadium is the value pick: comparable output capability for corporate, house-of-worship and regional shows — and less again if a MagicQ PC Wing Compact will carry the rig.
grandMA3 vs ChamSys MQ500M: Choosing a Lighting Console
Short answer
grandMA3 is the rider standard — take it when a touring LD, a broadcast, or a rider names it, or when the rig is large and complex enough that the network of NPUs matters. The ChamSys MQ500M Stadium is the value pick: comparable output capability for corporate, house-of-worship and regional shows — and less again if a MagicQ PC Wing Compact will carry the rig.
This is the question we get asked most on the lighting side, and the honest answer starts with a correction: we do not stock High End Systems Hog consoles. If your rider says Hog, keep reading — the section below covers what we substitute and why — but the real decision in our shop is between grandMA3 and the ChamSys MQ500M Stadium.
Both consoles will run essentially any rig we can send out. The differences that actually matter on show day are who is sitting behind it, how much time they have to program, and how much of the budget lighting control is allowed to consume.
Side by side
grandMA3 full-size
The industry-standard control platform for touring, broadcast and large-scale production.
Where it wins
- The rider standard — most touring LDs walk up and program without a manual
- Scales with NPUs for very large parameter counts and multi-user setups
- Deep pixel-mapping and media control for LED-heavy designs
- Show files travel: an LD arriving with an MA3 file can load and go
Where it costs you
- Highest daily rate of any console we carry
- Steep learning curve for occasional operators
- Big rig for a small show — often more console than the design needs
What ships with it
- grandMA3 lightLog in for pricing
Same engine, smaller surface — the common tour pick
- grandMA3 NPU processing unit LLog in for pricing
Adds parameters and network processing
- Swisson Ethernet DMX node — 8 portLog in for pricing
sACN / Art-Net to DMX at the truss
- Log in for pricing
ChamSys MQ500M Stadium
High-parameter stadium-class console at a fraction of the rider-standard daily rate.
Where it wins
- Very high parameter count for the money
- MagicQ runs free on a laptop, so pre-programming costs nothing but time
- PC Wing Compact gives you a matched backup or a small-rig console cheaply
- Excellent fit for corporate, worship, regional theater and festival house consoles
Where it costs you
- Less common on riders — a touring LD may not know the platform
- Show files do not cross to MA3; a swap late in the process means reprogramming
What ships with it
- MagicQ MQ500M Stadium WingLog in for pricing
Adds faders and encoders to the surface
- MagicQ Stadium ConnectLog in for pricing
Networking / expansion
- MagicQ PC Wing CompactLog in for pricing
Laptop-based control for small rigs and backup
- Obsidian NX2Log in for pricing
Onyx-platform alternative for mid-size rigs
Specs that actually change the decision
| Spec | grandMA3 | MQ500M |
|---|---|---|
| Platform | grandMA3 (MA Lighting) | MagicQ (ChamSys) |
| Rider acceptance | Industry standard | Accepted, less common |
| Parameter scaling | NPU processing units | Stadium Connect |
| Offline / pre-programming | onPC — free software | MagicQ PC — free software |
| Compact surface option | grandMA3 light | PC Wing Compact |
| Expansion wing | Available via light + full-size pairing | MQ500M Stadium Wing |
| Published daily rate | Log in for pricing | Log in for pricing |
| Operator pool | Largest — most freelance LDs | Smaller but growing |
| Best for | Touring, broadcast, large festivals | Corporate, worship, regional, house console |
Rates shown are published daily rates and are subject to availability and rental length. Weekly and monthly multipliers apply automatically — see our pricing guide.
Pick by room capacity
Under 300
Corporate breakout, small worship, club
A MagicQ PC Wing Compact runs a conventional rig plus a handful of movers. Spending grandMA3 money here buys nothing the audience can see.
300 – 1,500
Ballroom general session, theater, mid-size worship
MQ500M Stadium handles a full moving-light rig with pixel content and leaves budget for more fixtures — which is what actually changes how the room looks.
1,500 – 5,000
Large theater, arena club show, festival side stage
Decide on the operator, not the room. Touring LD arriving with a show file: grandMA3. Programming in-house or hiring locally: MQ500M.
5,000+
Arena, festival main stage, broadcast
grandMA3 full-size with NPUs. At this scale you are dealing with visiting LDs, multi-user programming, timecode and media servers — the rider standard is the standard for good reasons.
Real show scenarios
Touring artist with a rider
→ grandMA3
If the rider names MA3, send MA3. The LD arrives with a show file, patches, and is in focus within the hour. Substituting costs you a full programming day you did not budget.
Annual corporate general session
→ MQ500M Stadium
The rig is known, the cues are repeatable, and the same operator returns each year. MagicQ pre-programs free on a laptop, and the difference in console rate goes into fixtures instead of control.
House of worship weekend
→ MQ500M Stadium or PC Wing Compact
Volunteer or part-time operators, consistent rig, week-to-week repeatability. Low daily rate matters when the rental repeats 50 times a year.
Festival with rotating LDs
→ grandMA3
Guest LDs each bring their own file. MA3 is the one platform most of them share, so changeovers between acts stay on schedule.
If your rider says Hog
We do not stock High End Systems Hog consoles, and we will tell you that before you book rather than after. In practice, riders that name Hog are naming a capability tier, not a fixture list, and the two substitutions we offer both clear that bar: grandMA3 (full-size or light) when the LD is flexible and the show is large, or the ChamSys MQ500M Stadium when the budget matters more than the badge.
The one case where substitution genuinely costs you is a visiting LD arriving with a finished Hog show file and no time to reprogram. If that is your situation, tell us early — the answer is a cross-rental, and we would rather arrange it than watch a show start late.
Parameter count is the real spec
Console conversations tend to fixate on the surface — how many faders, how many screens. What actually limits you is parameter count and processing, especially once a rig includes pixel-mapped fixtures.
A rig of 40 conventional LED pars is a few hundred parameters. The same rig with Astera AX1 PixelTubes, PXL Bar 16s and a couple of dozen movers running pixel effects climbs into the thousands fast. That is when grandMA3 NPUs or ChamSys Stadium Connect stop being optional.
- Small rig, conventional fixtures: PC Wing Compact or Obsidian NX2
- Mid rig with movers and some pixel content: MQ500M Stadium or grandMA3 light
- Large rig, heavy pixel mapping, multi-user: grandMA3 full-size plus NPU
Do not forget the network between console and truss
Whichever console you pick, the DMX has to get to the fixtures. We ship Swisson Ethernet DMX nodes in 4- and 8-port configurations for sACN and Art-Net distribution, plus eDMX1 PRO single-port nodes for small drops and Elation E-Fly wireless DMX for positions you cannot cable to.
Budget the nodes when you budget the console. A console rental that arrives without enough universes at the truss is a console rental that does not work.
The full lineup we own
Everything listed below is owned, prepped and tested in our New Jersey shop — not sub-rented on request. These lists are pulled live from our rental catalog, so what you see is what is actually in the fleet today.
Everything we carry from MA Lighting
Our full active grandMA3 inventory — control surfaces and processing.
Everything we carry from ChamSys
The full MagicQ line we stock, from the PC Wing Compact to the MQ500M Stadium and its expansion hardware.
Everything we carry from Obsidian Control
Onyx-platform control for mid-size rigs.
Common questions
Do you rent Hog consoles?
No. We stock grandMA3 (full-size and light), the ChamSys MagicQ line including the MQ500M Stadium, and the Obsidian NX2. If a rider requires Hog specifically, tell us early and we will arrange a cross-rental rather than substitute without telling you.
grandMA3 full-size or light — which do I need?
Same engine, different surface. Light is the common touring choice. Take full-size when you need the extra playback faders and screen real estate, or when two people are programming.
Can I pre-program before the console arrives?
Yes, on both platforms. grandMA3 onPC and ChamSys MagicQ PC are free downloads, so your LD can build the show file in advance and load it on arrival. We can also book prep-room time so you can program on the actual console against the actual rig.
What does 'Stadium' mean in MQ500M Stadium?
It is ChamSys's designation for their highest-capacity MagicQ configuration — the parameter count and processing intended for stadium-scale rigs. It is the top of the MagicQ range we stock.
Not sure which way to go?
Send us the room, the audience count and the date. We will spec the system, tell you honestly where you can spend less, and quote it the same day.