INFiLED RS2.6 LED Panels: A Technical Guide to High-Resolution Rental LED Walls

For corporate stages, product launches and camera-facing sets, a 2.6 mm LED wall is often the right balance of resolution, brightness and budget. The INFiLED RS2.6 is one of the panels we reach for in that category. Here is what it is, how it's built, and how to plan an RS2.6 rental so it arrives show-ready.
What the INFiLED RS2.6 Is
The RS2.6 belongs to INFiLED's RS series, a line of lightweight cabinets built for the rental market. It is an indoor product with a 2.6 mm pixel pitch, a density of 147,456 pixels per square meter. Its wide horizontal viewing angle keeps color and brightness consistent for audience members seated off-axis.
INFiLED publishes several variants within the RS2.6 family, and brightness, power draw and weight differ slightly between them. Our team will confirm the exact specifications of the cabinets supplied for your wall.
Why 2.6 mm Matters in Event Environments
At 2.6 mm, content looks clean from roughly 8 to 9 feet away. That lets you put the wall close to front-row seating, behind presenters, or at the back of a stage that cameras will frame. Text on slides stays legible and faces on IMAG look natural.
Coarser pitches (3.9 mm and up) cost less per square foot but show visible pixel structure at close range. Finer pitches (under 2 mm) look superb but add significant cost and pixel count, which in turn needs more processing. For most ballroom and conference-center general sessions, 2.6 mm sits in the practical middle. Our LED wall rental guide covers pitch selection in more depth.
500 × 500 and 500 × 1000 Cabinet Options
The RS series comes in two cabinet sizes, which gives flexibility in how walls are designed and built:
500 × 500 mm: 192 × 192 pixels. Useful for fine-tuning wall dimensions, building odd shapes and filling small increments.
500 × 1000 mm: 192 × 384 pixels. Covers the same area with half the cabinet count, which means fewer connections to make and faster builds.
Because the two share the same width, they can be combined in one wall. For example, 500 × 1000 cabinets can make up most of the height, with a 500 × 500 row to hit an exact dimension.
Weight, Handling and Rental Workflow
INFiLED says standard RS cabinets are 25 to 35 percent lighter than comparable cabinets on the market. Published weights for the 500 × 1000 cabinet are around 9 to 9.5 kg (roughly 20 lb), depending on variant.
Lighter cabinets make a real difference on site:
Crews can handle them more safely.
Less weight goes onto ground-support structures and rigging points.
Load-in is faster when your labor call is short.
The RS series is also compatible with INFiLED's DBmk2 stacking system and with the stacking brackets and hanging beams common in rental inventories. That keeps structural planning familiar for crews.
Flat and Curved Design Possibilities
RS cabinets include a curve-adjustment system, so an RS2.6 wall can be built flat, or with concave or convex curves, without custom hardware. Curved walls work well for wrap-around stage backdrops, immersive product reveals and set pieces designed to be seen from multiple angles. Tell us at the design stage if you want a curve. The curve angle affects cabinet count, structure and content mapping.
Processing and Camera-Facing Considerations
Every RS2.6 wall needs an LED processor sized to its pixel count and data layout. At 2.6 mm the pixel count climbs quickly. A 16 × 9 wall of 500 × 500 cabinets is 3072 × 1728, over 5.3 million pixels. Choosing a processor comes down to total pixel capacity, per-port limits at your frame rate and bit depth, and the inputs your show uses.
We often pair fine-pitch walls with the NovaStar MX40 Pro, which offers ample capacity, 12G-SDI input and HDR support. Our MX40 Pro guide explains why.
For broadcast and livestream work, discuss your camera frame rates and shutter settings in advance. The processor and the camera need to be set up to work together so the wall looks clean on screen as well as in the room.
Best-Fit Event Use Cases
The RS2.6 is a strong fit for:
Corporate general sessions and keynotes, where the wall is both backdrop and presentation screen
Product launches and reveals, where close viewing and curved designs add impact
Award shows and galas with multi-camera coverage
Premium trade show booths, where visitors stand within a few feet of the display
Hybrid and broadcast events, where the wall has to look good both in person and on camera
It is an indoor product. For outdoor events, we'll recommend a weather-rated, higher-brightness panel instead.
What to Include in an RS2.6 Rental Package
A complete RS2.6 package usually includes:
RS2.6 cabinets in the right mix of 500 × 500 and 500 × 1000 sizes
A correctly sized LED processor, plus switching if you have multiple sources
Ground-stack or flying hardware (see our rigging rentals)
Power distribution sized to the wall's maximum draw
Power and data cabling with backup data paths
Spare cabinets, modules and receiving cards
Optional on-site LED technician support
Browse our full video rental inventory to see what else can be added to the package.
Request an RS2.6 Wall Design and Quote
Send us your stage dimensions, audience layout, camera plan and show dates, and we'll design an RS2.6 wall to fit, with native resolution, cabinet layout and supporting equipment spelled out. Request an RS2.6 wall design and quote.